Support Poles | Specifications | Rakks Shelving

SUPPORT POLE SPECIFICATIONS

Model

Description

Application

Specification

PL-408Wall Storage Support Pole with Compression Spring or Tie Bracket HardwareUp to 11' Floor-to-Ceiling with 2' Extension. PL-408 95-99"
A, C, F, G
PL-409Wall Storage Support Pole with Compression Spring or Tie Bracket HardwareUp to 11' Floor-to-Ceiling with 2' Extension. PL-409 107-111"A, C, F, G
PC2-XXXCompression pole for L-bracketUp to 12' Floor-to-ceilingB, C, E, F, G
PC4-XXXCompression support poleUp to 12' Floor-to-ceilingB, C, E, G
PS4-XXXSingle support poleUp to 12' Floor-to-ceilingC, D, E, G
PD6-XXXDouble support poleUp to 16' Floor-to-ceilingB, C, D, E, G

Poles are stocked in clear and black anodized finishes.
PC2, PC4 and PL poles are also stocked in white powder-coat. XXX – Denotes length in inches.


Model

Description

Application

Specification

PL-HDWSpring Compression KitPL pole floor-to-ceiling Finish to match PL poles
PM-PC16Mount and InsertPC2/PC4 Threaded compressionBlack or clear 3" stem
PM-PD13Mount and InsertThreaded compression for PD6Black nylon only 3-1/2" stem
AB-0202Anchor Bracket 2" x 2"Pole-to-pole connections2 tapped holes
AB-0035Anchor Bracket 3-1/2" x 3-1/2"Pole-to-ceiling connections2 tapped & 2 through holes
AB-PCTie-Pole to Wall BracketDecorative bracket for PC2/PC41 tapped & 1 through hole
AB-PLTie-Pole to Wall BracketDecorative bracket for PL/PS41 tapped & 1 through hole
MT-XXXMitered Tie-PolePole-to-wall connectionProfile & length as specified
BT-XXXTie Bracket 1-1/4"Pole-to-wall connectionLength & finish as specified
BT2-XXTie Bracket 2"Pole-to-wall connectionLength & finish as specified
PG-PS4Grommet for PS4 Pole - BlackIntegrated configuration (Type D)Fits 2-1/2" diameter hole
PG-PD6Grommet for PD6 Pole - BlackIntegrated configuration (Type D)Fits 3-1/2" diameter hole
SP-001Spline ConnectorJoins poles end-to-endUse 2 per pole
SP-PC4Spline Connector for PC4Joins PC4 pole end-to-endUse 2 per pole
NP-0832Channel Nut w/ 8-32 screwInstalls from the front of poleSteel w/ 1 tapped hole
NP-0420Channel Nut w/1/4-20 screwInstalls from the end of poleSteel w/ 1 tapped hole
PET-XXXThreaded InsertInstalls into poles channelsLengths up to 8'
PC-SC-XXXPanel Framing Channel KitSupports panels between polesLength as specified
PH-G25Hinge Kit for 1/4" glass doorsAttach glass doors to polesSingle or double
PH-W75Hinge Kit for 3/4" wood doorsAttach wood doors to polesSingle or double
CC-096Channel Cover 96"Covers open channelBlack or transluscent
PL-BABracket AdapterCorner condition PL or PC2Finish to match poles
LB-025Lamp Bracket for 1/2" StemAttach lamp to poles or standardsClear or black anodized
EC-0102End Cap for PS4 PoleCovers end of poleBlack only
EC-0202End Cover for PD6Covers end of poleBlack only
PF-00B Bottom Pad for PL PoleProtects floor / covers endBlack or white
PF-00TTop Pad for PL-HDWProtects ceiling Black or whiteBlack or white
BJ-BBJ-Hangbar Bracket Bolt-OnAttach J-Hangbar to sides of PL or PC2 pole1-1/2" x 1-1/2" x 1/4"
w/ 2 holes
BJ-OL
BJ-OR
BJ-0C
J-Hangbar Offset
Bracket left/right
or center "T"
Attach to front of pole
left/right side
BJ-0C attaches to front of pole
where sections join
1-3/8" offset

Note: Contact Rakks Customer Service for additional information and specifications.
XXX – denotes length in inches.

Site Design by Laidlaw Group